MGB: Bezel for Radio Speaker Screen, Chrome, '62-'67
$35.00
This is one very good used original chrome Radio Speaker Screen Bezel for the early MGB and GT Models. Chrome is in excellent shape. All four studs are intact, straight and include all four nuts. This fits over the speaker screen on the radio console. This bezel is # 6 in the drawing below. For your reference- the reproduction of this bezel retails new for just over seventy dollars so here is a great chance to save a few dollar on a great used original piece of trim!
Fits early MGB and GT model years; '62-'67 including '62, '63, '64, '65, '66, '67 RD to 138400, GT to 139470
Item ships at cost with no outrageous handling fee.
[Order]
[Checkout]
|
MGB Heater Assembly KIT, USED, FUNCTIONING
$250.00
This USED MGB Heater assembly kit fits the MGB RD/GT from car # 303704 to 410000. (Most late MGBs, but check your car # to be sure)
The inner radiator has been pressure tested and no leaks were discovered. The fan motor was also tested and works just fine as well. Includes a new large rubber heater box bottom seal (# 363-135, Rear round heater seal (# 363-215) and the heater bottom gasket (# 363-210) If you are interested in the brand new assembly that we sell (Moss Motors # 363-005) just email me: ben@britbits.com and I'll send along the current price (5% off Moss retail)
[Order]
[Checkout]
|
MGB Rebuilt Kingpin Sets
$510.00
Rebuilt kingpins sets are the safest and fastest way to replace your old worn out kingpins. All internal parts have been replaced. The kingpin bushings have been properly reamed and correctly preloaded. Included are two kingpins, a set of V8 inner a-arm bushings, upper trunnion pins with shock bushings and the lower trunnion pins with washers and seals. A built in $75.00 core charge is refunded to you upon our receiving your old rebuildable kingpins.
Other suspension parts such as a-arms, bump stops, bump stop spacers, sway bar links, shocks and competition components are available at competitive prices.
[Order]
[Checkout]
|
MGB & Midget Rostyle Wheels 13" - 14" Reconditioned
$110.00
Our reconditioned wheels are sand blasted, checked for trueness, cleaned, filed and hammered, repainted silver (allowed to cure) and masked off by hand to prepare them for precision black painted inserts as original (or better!) They are available in the 13" diameter for MG Midgets and the 14" diameter for the MGB. As these wheels are one of our most popular items- please call or email ben@britbits.com for availability and/or to get on our waiting list. The cost is $110.00 each or $100.00 each if you provide the wheel. Your carefully packed wheel ships via UPS Ground at a shipping charge of $24.00 per wheel. We pay $10.00 each for good quality usable core Rostyle wheels.
[Order]
[Checkout]
|
Midget / Spitfire Slave Cylinder Housing Bracket
$70.00
Used - MG Midget / Triumph Spitfire Slave Cylinder Housing Bracket will fit all 1500cc Models. They hold the slave cylinder in place on the bell housing. To change the slave cylinder, the bolt has to come all of the way out then you can remove the cylinder. I have a small supply of good used ones.
[Order]
[Checkout]
|
MGB Seat Adjusting Handle, USED (sold individually)
$9.95
Have you ever had one of these snap off while trying to adjust a rusted seat assembly? I have. After you finish cursing your broken handle and maladjusted seat-- spray some penatrating oil in the works and buy one of these good used handles to replace the one you broke. I have a small supply of chrome handles in good shape with only minor pits visible from several inches.
Fits: 1969 on: RD from (c) 158371 on & MGB GT from (c) 158231 on
For your reference only- We also sell the new replacement handles for $31.30 so here is a great chance to save a few dollars on a good used part! If you're interested in buying a new handle call or email ben@britbits.com. Item ships at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
Austin Healey 100-6 & 3000 Valve / Rocker Cover, Orig.
$199.00
original used Rocker / Valve Cover for the Austin Healey 100-6 & 3000 models. Cover includes used oil filler cap, valve clearance plate and 'Austin' plate. This cover works just fine- we only changed it because a customer wanted to go with an aftermarket alloy version that we also sell. The paint is a bit chipped in spots, but quite usable indeed.
Fits: 100/6 & 3000 (6 port) models. Item ships at cost only with no outrageous handling fee. We also sell the new aftermarket alloy valve covers for the Austin Healey those can be found on the "NEW" parts page on this site.
Share
[Order]
[Checkout]
|
948 cc Engine, ready to go!
$2,500.00
This 948 cc Engine is used and has good oil pressure and good compression. It runs well and was recently removed from a well maintained bugeye only because the owner wanted to install a more powerful engine. This power unit includes the SU Carb set, air cleaners, intake manifold and exhaust header. Engines ship via truck freight or may be picked up here at the shop.
Share
[Order]
[Checkout]
|
TRIUMPH TR3A & TR3B Sidecurtain Anchor Plate SET
$29.95
You are bidding on one good used full set of original Dzus Mount Sidecurtain Anchor Plates for the Triumph TR3A from TS28826 thru TR3B. This side curtain anchor set has been lightly sandblasted and primed for your convenience. As you may be able to see from the photo of the mount in the lower left corner someone has attempted to slightly enlarge the holes in one of that mounts. We sell the new reproduction of this set fro $72.00 so here is a good chance to stay original and perhaps save a few dollars! These ship USPS Priority Mail at cost with no outrageous handling fee. If you're interested in a NEW set of anchor plates email ben@britbits.com
[Order]
[Checkout]
|
MGB Air Vent Set & Escutcheon, 'Face Level'
$45.95
This is a very good used Air Vent Assembly for the MGB and MGB GT Models. This set includes both left and right hand side center 'Face Level' Vents and the the Escutcheon that trims the two vents. All four foams remain intact and open and close freely. A nice item indeed! This vent assy is in stock and ships at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
MGA Engine, Rebuilt, '59-'60, 1600
$5,550.00
This MGA 1600 Engine is freshly rebuilt and made for the 1959-'60 model. Extensive & expert machine work was completed prior to reassembly. The carb set was recently rebuilt and features intake manifold, new linkages and polished dash pots. The carb set and intake manifold is not included in the $5,500 engine price, but may be purchased for $850.00. A newly rebuilt distributor & wire setup is also available. If you have any questions about this engine- please feel free to contact Sam Smith here at the shop. Item ships truck freight or may be picked up.
[Order]
[Checkout]
|
MGA SU Carburetor Pair, 1600 & 1622
$850.00
The carb set was recently rebuilt and features intake manifold, new linkages and polished dash pots.
[Order]
[Checkout]
|
Rubber Gloves
$9.95
I tried more than a dozen different kinds of gloves before I found these. I use them all the time, I'm in and out of the shop all day long, I can be under the hood one minute and the next on the phone and looking online or through manuals. Thin enough to do small tasks with confidence, great for painting and can sometimes be reused. These are powdered with only a small amount of oat starch which allows them to come on and off with ease. Two things I've found that these gloves don't do well- one is in a cleaning tank with degreaser and the second is with jobs pertaining to bearings(wheel bearings, main and rod bearings) where you really need the ability to feel small tolerances or roughness. 100 large, latex, ambidextrous gloves per box. IN STOCK. These ship at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
GIFT CERTIFICATE
Give the gift of a Brit Bits gift certificate to your favorite British car enthusiast! As a distributor for Moss Motors we discount their retail prices and gift certificates may also be used for service / restoration work here at the shop. Please use the drop down menu to pick the amount of your gift. (You will be charged the amount you choose on the dropdown menu)
During 'checkout' don't forget to type in who the gift is for in the 'ordering instructions' section. Gift certificates ship free! If you have any questions please feel free to contact us:ben@britbits.com
Share
|
MGB Map Pocket and Finisher, Original
$59.95
This original MGB Map Pocket includes the chrome finisher on top. The original carpet remains intact and somewhat thinned consistant with its age. the carpet has been carefully touched up with fabric paint so as not to overspray the vinyl and chrome. A nice piece with many more seasons remaining!
[Order]
[Checkout]
|
MGB Rear Differential Cover (Reconditioned) & Gasket
$69.95
This Rear Differential Cover for the Tubed Type Axle on an MGB has been reconditioned by our in-house pros. The outer portion of this cover has been sandblasted, primed and painted black. The contact surface is flat and has been cleaned on the wire wheel. This cover includes a new Rear Diff Gasket.
**Again- this Cover is for the Differential on an MGB TUBED Type Axle. If you're not sure if your MGB has a tubed type axle, click the listing title for more info. If you have any questions, please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
Radiator Expansion / Overflow Tank and New Filler Cap OEM
$89.95
OEM Radiator Expansion / Overflow Tank and New Filler Cap for MGB, Sprite & Midget. Original and Reconditioned by professionals. This original OE / OEM brass tank was carefully cleaned on a wire wheel prior to being primed and painted black. If you have any questions, please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
Door Check Assy, TR2, TR3, TR3-A & TR3-B, Original / O.E.M.
$24.95
One good used Original Door Check Assembly for the Triumph TR2, TR3, TR3A & TR3B.
[Order]
[Checkout]
|
MGB Accelerator / Choke Control Bracket, N/A
$54.95
This good used Accelerator Control Bracket fits MGB Models with HIF-4 Carb setups. This is the stock / OEM Bracket for the '72, '73 & '74 MGB Roadster. This is Bracket is no longer available new, but this bracket is in excellent condition and has not been modified as many others have been over the years.
[Order]
[Checkout]
|
MGB Header Rail (Original used)
$99.95
I have several good used Original MGB Header Rails. These OE rails are not rusty and the screw holes are in good shape (not stripped). Feel free to contact us at ben@britbits.com if you need additional parts for your header rail(latches, pads, header rail retainer, seal, top, frame, etc)as they do not come with the rail. We also sell NEW replacement MGB Header Rails (part# 406-250) for $227.95.
[Order]
[Checkout]
|
MGB Glove Box Lid & Chrome Finisher Strip, '62-'67 MGB
$99.95
This used original lid includes the chrome finisher strip. For a show quality finish, this OE lid would be a good candidate for a new coat of black wrinkle-finish MGB dashboard paint (available here for $12.99/can)
Neither the lid nor finisher strip are available new. If you need the glovebox lock and key, lid restraint and screw or any other items, feel free to email ben@britbits.com
[Order]
[Checkout]
|
