New Parts h_generic_bb.gif
 
MGB Parts
 
Accessories
 
Bits!
 
Books & Manuals
 
On Sale
 
Rebuilt Parts
 
Used Parts
 
Triumph Parts
 
Share
Share
 
GIFT CERTIFICATES!
 
New Parts
 
British Distributor Vacuum Units and Lines

Welcome to Brit Bits, your one-stop
(SALES TAX FREE!) source for new and used parts for your British Car. We are a distributor for the major British parts suppliers including Moss Motors and can save you money off their retail prices, but more importantly- We have the technical knowledge to help you find the correct part and install it the correct way THE FIRST TIME. We own and work on these little British cars too and care about keeping them on the road! Try us out and experience the difference! Prices are subject to change and we DO try to keep our prices current. All shipping listed is for within the contiguous US. All other locations may incur additional shipping fees. If you don't see what you need or you would like to confirm a price, Please don't hesitate to contact us. Call us at 1-800-995-2487 or email your parts questions to sam@britbits.com

Share

   
tk50.jpg Points/Condenser Set
$8.99
The 152-220 Point Set fits all cars with the Lucas 25D Distributor - whether it be MG, Triumph, or Austin-Healey.


   
mgbcupholderone Custom Cup Holder for MGB, '72-'80, NEW!
$31.95 $29.00 On Sale!
NOW IN STOCK: Enhance your '72-'80 MGB with this truly custom Cup Holder! This is NOT your usual generic cup holder! This is custom molded to fit the trapezoidal-shaped area just in front of the shifter, and looks like original equipment. Made from black, textured ABS just like the console it sits on, it fits two beverages--from small cups and cans to medium sized bottles and mugs. No fasteners are necessary. Simply set in place, and it is trapped in position. Removal is just as simple. Several of us here at Brit Bits have these in our own MGBs and have been quite happy! This item ships at cost only via USPS Priority Mail. The cost that is passed onto us by USPS (usually between $5.00 and $8.00 for most US locations) will be added to your credit card total when we pack up and weigh your order. If you have any questions please feel free to contact Sam.

Share


   
BatteryDisconnectSwitch Battery Disconnect Switch
$6.89
Just the thing for a quick disconnect for your battery - installs in just a few minutes. Connects to the negative terminal of the battery and will prevent battery drain during the layup months or just an added feature to help prevent car theft.

Share

Quantity

   
MGA Turn Signal Switch - NEW
$129.95
As our rebuilt MGA Turn Signal switches are no longer available, we are offering the new replacement switch for $147.25. We have sold and installed many of these and have had great luck with them! This switch fits as original. It includes the handle screw, but does not include the handle itself (We do sell the handles separate if you need one). If you're interested in ordering one of these new switches- please call or email Sam!


   
GBStickers.jpg GB Stickers
$3.50
Great Britain Stickers; they say "GB" on small oval stickers on a square backing - 3" high X 4.5" wide. I have them in white and yellow. I ran around and stuck them on everything including my show truck. So far, they are holding up great in exterior applications. I picked these up from Gary Booker at GB Spares. Plenty in stock. If you have any questions please feel free to contact Sam.

Share


   
DASHTOP MGB Dash Top Repair Panel / Overlay / Cover, NEW
$85.50
Our Dash Top Cover will make your dash top look great again. Covers your cracked dash top. We have installed many of these here at the shop over the years and are always pleased with the result! Includes adhesive and installation instructions. We offer three versions of this product: one for the 68-71 MGB, one for the 72-76 MGB and one for the 77-80 MGB. Please don't forget to specify the year of your car in the drop down menu. These covers take about a week to arrive here before being shipped to you. Made in the USA. These ship via USPS Priority or FedEx at cost only with no outrageous handling fee. Your cover ships safely in a reinforced box to prevent bending / possible damage.
We ship worldwide. Shipping is listed for U.S. destinations only. For shipping outside the U.S. please email or call.


   
4pcconsolerepairkit MGB Center Console / Armrest Repair Kit, 4 PC, '72-'80
$14.95
4 piece KIT INCLUDES: 1 Centering Guide ....A must for all '72 - '80 MGB's! Keeps your console latch aligned, so your armrest won't crash down onto your console, breaking both latch and console. Also absorbs the force of those passengers who push sideways on your armrest with all their might to lift themselves out of your car...a common cause of console breakage! Made of black high-impact plastic, textured to match your console. Installs easily using existing armrest screw holes. No MGB should be without this guide! 1 Latch Plate ....If your console is like most, breakage or cracking has occurred around the latch area. Finally, here's a repair piece! Fits in the latch recess of your console, and looks like original equipment. Made of black high-impact plastic, textured to match your console. Installs in seconds...can be simply set in place, or glued down permanently. Make your console like new again! Includes: 1 Contact Male Latch, 1 Contact Female Striker, 1 Set of Installation Instructions


   
GearReductionStarter.jpg Gear Reduction Starters, MGA, Spriget,TD/TF,Spitfire,TR250
$299.95 $195.00 On Sale!
These starters are smaller, lighter and produce more torque than the original starter and come with a one year warranty. They are excellent units, replated like new and CNC machined using a standard 1.2 hp. Nippondenso USA factory rebuilt starter. Easy to install and have a long life. We ship these to you at cost via UPS Ground. PLEASE USE THE DROP DOWN MENU TO CHOOSE THE MAKE AND MODEL OF YOUR ENGLISH CAR. If you have any questions please feel free to contact us: Sam!

Share
Choose the starter for your car. We ship worldwide. Shipping is listed for U.S. destinations only. For shipping outside the U.S. please email or call.


   
GearedStarter.jpg Gear Reduction Starters for Austin Healey, MGB, Jaguar, Triumph, Lotus
$299.95 $195.00 On Sale!
These starters are smaller, lighter and produce more torque than the original starter and come with a one year warranty. They are excellent units, replated like new and CNC machined using a standard 1.2 hp. Nippondenso USA factory rebuilt starter. Easy to install and have a long life. We ship these to you at cost via UPS Ground. PLEASE USE THE DROP DOWN MENU TO CHOOSE THE MAKE AND MODEL OF YOUR ENGLISH CAR. Thank you! If you have any questions please feel free to contact Sam!

Share


Choose the starter for your car. We ship worldwide. Shipping is listed for U.S. destinations only. For shipping outside the U.S. please email or call.


   
pnx-1281_at_ml Pertronix Ignitor - Austin Healey
$109.95 $108.79 On Sale!
New Electronic Ignition to fit Austin Healey 3000 and MGC with Positive Ground system and the 25D6 Distributor. Ignitor made by Pertronix.


   
bitssmalllogo GIFT CERTIFICATE
$25.00
Give the gift of a Brit Bits gift certificate to your favorite British car enthusiast! As a distributor for Moss Motors, we discount their retail prices, and gift certificates may also be used for service/restoration work here at the shop. Please use the drop down menu to pick the amount of your gift. (You will be charged the amount you choose on the dropdown menu) During 'checkout' don't forget to type in who the gift is for in the 'ordering instructions' section. Gift certificates ship free! If you have any questions please feel free to contact Sam!

Share



   
TieRodRemovalToolDraper.jpg Ball Joint Puller / Tie Rod Removal Tool
$48.95 $45.00 On Sale!
Tie Rod Removal Tool or Ball Joint Separator by the Draper Tool Company. Made in the UK. I have used various methods over the years to remove tie rods with mixed results. This is the only tool I have ever used for this purpose that works easily and doesn't damage the rubber boot, which is useful, since most of the time I just want to change the boot anyway. Ever since I discovered this tool I have tried to keep a few in my display case at all times. It's a good seller, it works and you'll love it!

Share


   
Coindish.gif Coin Dish, MGB
$9.99 $7.50 On Sale!
1972 - 1980 MGB This molded plastic tray replaces the ashtray insert. Very convenient for those coins and small items.

Share

Quantity

   
MGBtrunkPROP Boot / Trunk Self Triggering Prop Rod
$37.95 $36.58 On Sale!
The self triggering /automatic telescopic prop rod is much easier to use than the factory type that reqires the use of both hands to release. Simply lifting the trunk slightly releases the catch to lower. Item ships at cost only with no outrageous handling fee.

Share

Quantity

   
MGBhoodPROP Bonnet/Hood Self Triggering Prop (MGB '71-on)
$34.85 $33.20 On Sale!
The self-triggering /Automatic telescopic prop is much easier to use than the factory type that requires use of both hands to release. Simply lifting the hood slightly releases the catch. Cat not included. Item ships at cost only with no outrageous handling fee. Please allow 7-10 days transit time.

Share

Quantity

   
images MG Valve Stem Caps
$9.99 $8.79 On Sale!
Caps feature raised octagon image and come in 2 colors- silver or gold.

Quantity

   
collapsableCUPholder Collapsible Cup Holder
$11.95 $11.35 On Sale!
This Cup holder truly fits the decor of a sports car's interior. Made of black, grained plastic to match other parts of the interior, it adjusts to hold any size can, cup or mug. And when not in use, it folds up to 3/4" thin! Mounts with screws through carpet, so that it does not leave marks if removed for shows. Quit spilling on your car seats and on your pants! A tremendously nice modern convenience for your vintage car. Inexpensive! Ships via USPS Priority Mail at cost with no outrageous handling fee.

Share

Quantity

   
MGBmagneticCOVER Cowl Vent Cover
$11.99
Stay warmer and drier with this magnetic vent cover! Cover will stop water leaking into your MGB, and eliminate that cold draft when driving in chilly weather. Also prevents debris from falling into your vent. Magnetic cover stays put while driving, and will fit in your glove box when not in use. If you require us to ship- the additional cost of USPS Priorty Mail shipping is added onto your total when we process your payment. Item ships at cost only with no outrageous handling fee.

Share

Quantity

   
SHOPAPRON MG/Triumph Shop Apron
$23.99
MG or Triumph Logo shop apron with adjustable straps and three deep pockets. The same aprons worn by our technicians when working on cars or baking cakes (Not in the same apron)! Please allow 7-10 days for delivery. Item ships at cost with no outrageous handing fee.
Please choose MG or Triumph logo. We ship worldwide. Shipping is listed for U.S. destinations only. For shipping outside the U.S. please email or call.

Quantity

   
LICENSEplates License Plate
$10.40
Display your loyalty with one of our regulation size license plates. Embossed aluminum plates with crisp screen printing. The price is $10.40 for the Union Jack, MG Crest and TR Shield plates. The price is $14.20 for the TR6 plates. TR7 and Spitfire Plates are no longer available. Items ship at cost via USPS Priority Mail with no outrageous handling fee.
Choose your license plate from the list below. Prices vary by plate as stated in the description. We ship worldwide. Shipping is listed for U.S. destinations only. For shipping outside the U.S. please email or call.

Quantity

   
oilsealconversionkitspridget Rear Crankshaft Oil Seal Conversion for AH Sprite / MG Midget
$259.99 $246.95 On Sale!
AH Sprite / MG Midget: Complete oil seal conversion kits for the Sprite / Midget A Series engines. These kits require careful fitting to ensure that the rear cap packing piece is leak tight. The seal rides on the outer flywheel mounting flange and this must be smooth. No drilling or cutting is required and the crank does not have to be removed. Installation does require removal of the flywheel and engine back plate. These take about a week to arrive here at the shop as we only order them as we need them. Use the drop down menu to select the correct engine specific kit for the engine on your AH Sprite or MG Midget.


We ship worldwide. Shipping is listed for U.S. destinations only. For shipping outside the U.S. please email or call.


   
hammerSIXpoundlead Wire Wheel Knockoff Hammer, 6 LB Lead
$48.95
One of my favorite items is this 6 pound lead knockoff hammers. Made by Cook Hammer Company. These make a great gift for the British car enthusiast with wire wheels & knockoffs. We had been using four lb hammers for years here in our British car restoration shop, but recently switched to these six pounders and couldn't be happier! Experience the difference two extra pounds can make! Lasts longer, hits harder and won't damage chrome. COOK's antimonial lead alloy provides the softest blow- protecting your chrome knockoffs while getting the job done with ease! Perfect for the Knock offs on the MGB, MGA, MG TD, TF, TC, Jaguar, Triumph TR2, TR3, TR4, TR6, Austin Healey 100 & 3000 models. IN STOCK. Item ships via UPS Ground at only the cost determined and passed down to us by UPS.


   
MGBelectricalBOOK MGB Electrical Systems MANUAL / BOOK
$69.99 $52.20 On Sale!
This is the book MGB owners have been waiting for! Based on information from his definitive website, Rick Astley has produced a book which covers everything from understandable theory to recommendations for upgrades and replacement of troublesome electrical components. The 185 page book is filled with color photos of comonents and simplified diagrams of electrical circuits. Both early and late model MGBs are covered, as well as differences between UK and export models. We rate this book as a "must have". Please allow 7-10 days transit time. Item ships at cost with no outrageous handling fee.


   
MGBlateCONSOLE MGB Center Console, Tunnel, Fits 1972-1980 MGB
$89.99 $75.95 On Sale!
This Center console is a reproduction of the original factory consoles found in the '72-'80 MGB model. Number four in the drawing. Item ships at cost only with no outrageous handling fee. Please allow 7-10 days for delivery.


   
MGBauxCONSOLE MGB Auxiliary Center Console and Armrest, Fits 1962-'71 MGB
$139.99
Similar to vintage after market consoles made by Amco some years ago. This fits the 1962-1971 MGB. Black grained ABS thermoplastic base with leather covered armrest. A large storage compartment is located under the armrest pad and a cup holder is located in the forward portion. Please allow 7-10 days transit time. Item ships at cost only with no outrageous handling fee.


   
MGBarmrest MGB Premium Leather Armrest
$56.95
Replace your worn out armrest with this premium quality piece for just a few dollars more than the vinyl replacement. Leather. Won't tear at seams. Won't crack in cold weather. Even smells nice! Correct beading. Other armrests use fat beading. Superior needlework and upholstering. Corners are crisp, edges are sharp. No rollover. Grained black fiberboard underpanel. Other armrests use plain black cardboard. Tacked, not stapled. Just like factory armrests. Item ships at cost only with no outrageous handliong fee. please allow 7-10 days for delivery.


   
MGBconsoleINSERTrubber MGB Center Console LINER, Rubber, NEW!
$14.95 $11.95 On Sale!
A soft rubber pad that protects the recessed screw holes from getting full of the Chapstick you left in 105 degree heat, and it's removable to easily clean that same Chapstick off! Add a touch of luxury to your MGB with this practical Rubber Console Mat! Many higher-end cars now come with mats such at this, and for good reason. Installing this Mat stops the annoying rattling of items against your console floor, and prevents them from sliding around and scratching as well. The Soft Touch Mat FEELS great--makes picking up coins, etc. from its ribbed surface a pleasure. And it LOOKS terrific, too! Made in USA of high quality industrial rubber. Black. Note: These DO fit the aftermarket consoles for pre-1972 MGBs, by trimming the rear edge! Item ships at cost only with no outrageous handling fee.


   
BENTLEYearlyB MGB Shop Manual, "Bentley" Reprint for the '62-'74 MGB
$69.95 $61.70 On Sale!
Comprising of the official Driver's handbook, workshop manual and special tuning manual. If you own an early MGB ('62-'74) this is THE manual to have on your workbench. It's the one that our MGB technicians use here at Brit Bits and we recommend you get yourself a copy. Everything from basic tuning data, to torque settings and complete component rebuilding are covered by this comprehensive manual. Please allow 7-10 days transit time. This book ships via USPS Priority Mail at cost only with no outrageous handling fee.


   
BENTLEYlateB MGB Shop Manual, "Bentley" Reprint for the '75-'80 MGB
$74.00
Comprising the official Driver's handbook and workshop manual. If you own a late MGB ('75-'80) this is THE manual to have on your workbench. It's the one that our MGB technicians use here at Brit Bits and we recommend you get yourself a copy. Everything from basic tuning data, to torque settings and complete component rebuilding are covered by this comprehensive manual. Please allow 7-10 days transit time. This book ships via USPS Priority Mail at cost only with no outrageous handling fee.


   
TR6shopMANUAL Triumph TR6 - TR250 Shop Manual
$84.95
IN STOCK! For the TR6 & TR250 Models. This is the manual our technicians have trusted for years. Robert Bentley manuals contain reprints of the factory workshop manual, plus the owner’s manual. The most complete and authoritative manual available for your car. This item ships at cost only via USPS Priority Mail. The cost that is passed onto us by USPS (usually between $5.00 and $8.00 for most US locations) will be added to your credit card total when we pack up and weigh your order. If you have any questions please feel free to contact Sam!


   
TurnSIGNALee1654 Turn Signal Switch, MGB 62-67 & Sprite MkIII / Midget Mk II
$34.99
Turn Signal Switch Assembly: Original style for the following MGB and Spridget Models: MGB: '62-'67 (includes '62, '63, '64, '65, '66 & '67) MG Midget MkII Austin Healey SPRITE Mk III This is part # 141-770 is IN STOCK and ships only at the cost passed down to us from the shipping company. As always sales tax free.


   
AHlicPLATEbracketFRONT Austin Healey 100, 3000 License Plate Mounting Bracket (front), NEW!
$62.95 $58.85 On Sale!
This front License Plate Mounting Bracket is made for North American style license plates. Part# 806-730.


   
MGTserieswindscreenSEAL Seal / Strip Windshield to Cowl / Body, MG TC, TD & TF, NEW in Package
$19.99 $18.95 On Sale!
Applications: MG TC, TD & TF. This 44 inch Strip Rubber Seal Strip is correctly molded for the MG T-Series. This item ships at cost only via USPS Priority Mail. The cost that is passed onto us by USPS (usually between $5.00 and $8.00 for most US locations) will be added to your credit card total when we pack up and weigh your order. If you have any questions please feel free to contact Sam!


   
HealeyManifoldTubes Austin Healey Manifold Drain Tubes
$14.95
Austin Healey Manifold Drain Tube Set. Designed as original to replace worn, broken or missing Manifold drain tubes.


   
WireWheelKnockOff-4LB Wire Wheel Knock Off Hammer, 4 LB. Lead
$43.95
One of my favorite items is this 4 pound lead knockoff hammer. Made by Cook Hammer Company. These make a great gift for the British car enthusiast with wire wheels & knockoffs. More swinging power than a 3 pound hammer, yet a lighter swing than a 6 pounder. COOK's antimonial lead alloy provides the softest blow- protecting your chrome knockoffs while getting the job done with ease! Perfect for the Knock offs on the MGB, MGA, MG TD, TF, TC, Jaguar, Triumph TR2, TR3, TR4, TR6, Austin Healey 100 & 3000 models. IN STOCK. Item ships via UPS Ground at only the cost determined and passed down to us by UPS.


Screenshot_1 MGA Custom Cup Holder with Power Port
$65.00
The MGA Custom Cup Holder is easy to install, no fasteners necessary; just set the MGA Custom Cup Holder in place and it's trapped in position. Made from black textured ABS (plastic), the Cup Holder is custom molded to fit the trapezoidal shaped area, in front of the shifter, and looks like original authentic MGA equipment. The MGA Cup Holder may fit a small cup/can up to medium sized bottles and travel mugs. It also has a built-in power port to charge your devices or power your GPS! This one of a kind MGA Custom Cup Holder deserves a home in your Classic/Vintage/Antique MGA, and not kept on our shelves. If you have any further questions and/or concerns, please call or email Sam. Thank you for inquiring and we look forward to your business. Take care!

To Avoid a Shipping and Handling fee, if you're local to the Rye NH area, please stop in and check out our Specialty Service Shop and Show Room.

triumph-cup-holder.resized TR6 Custom Cup Holder
$26.00
Enjoy this handy holder every time you use your Triumph! Stepped design holds cans, fast food cups, bottled water, some travel mugs, and even your cell phone. Easy position for driver and passenger alike to reach. Installs in 5 seconds without fasteners of any kind, and removes just as easily. Properly injection molded in USA of tough, black ABS. Textured to match interior. This is a quality product. (Note: Gray Cup Holder used for photographic purposes. Your Cup Holder will be Black).

1203.resized Quick-Lift Battery Cover for MGB '74.5-'80
$65.00
Enjoy Instant Access to your battery! Just Twist & Lift -- No tools required! This Cover is such an improvement to your Older MGB! Each QuickLift Cover starts as a precision-cut blank, and then is worked by hand: to form the leading edge, weld the hinge, grind the welds and assembly tabs, and wire brush before e-coating in a gloss black finish. Quarter-turn fasteners in our Cover are made of Stainless Steel, and will last forever. Quality made entirely in USA. Because these are made by hand, our production quantities are limited. Order yours today!

1195.resized Quick-Lift Dual Battery Cover for MGB '62-'74
$165.00
Enjoy Instant Access to your battery and battery storage box! Just Twist & Lift -- No tools required! This Cover is such an improvement to your MGB, you will smile every time you use it :) Each QuickLift Cover starts as a precision-cut blank, and then is skillfully worked by hand to create the raised ribs, weld the assembly together, grind assembly tabs, and hammer out warp. This is quite time-consuming and takes considerable skill, but the results are worth it! Finally, each assembly is pneumatically wire brushed, then e-coated in gloss black for a durable, lasting, and beautiful finish. Quarter-turn fasteners in our Cover are made of Stainless Steel, and will last forever. Quality made entirely in USA. Because these are made by hand, our production quantities are limited. Order yours today!

triumph-lift-kit Spitfire Bonnet Lift Kit
$79.95
Everyone knows how heavy and awkward the Spitifire Bonnet is. And a few of us have even been "clam-shelled" under it! So treat yourself and your bonnet to this marvelous new Bonnet Lift Kit! Two powerful gas springs will now make lifting your bonnet a thing of ease! The initial lifting force is substantially reduced, and after opening only a portion, the springs take over completely and raise your bonnet fully open. Plus your bonnet now has even support, and there is no risk of it crashing down. Lowering the bonnet is so much better, too! The weight does not build and build like before, but instead you "pull" the bonnet down and then lower it for only the last portion while the springs help counterbalance the weight! This cleverly engineered design requires NO DRILLING. Custom fabricated brackets and ball studs fasten to existing geometry. Gas Springs have even been custom made for just this application--they are not "off the shelf." Treat yourself and your Spitfire to a little luxury!

1067.resized MGB Air Intake Grille Guard
$12.95
Keep your MGB vent rodent, leaf and debris free with this OEM appearing grille screen. Chip proof Black Powdercoated Steel Honeycomb design fits directly under the chrome air intake. Easy installation and cheap insurance against all things that could fall inside the unnoticed cowl vent of the MGB.

download In-Line Spark Checker
$15.00
Tests for proper spark and continuity of ignition circuit to a specific plug. It has a plastic construction with a see-through design, and is compatible with most ignition systems. Its 4 In. pigtail wire allows for easy connection. A must have for any mechanic-at-heart.

100_0491 MG Midget Self- Triggering Trunk Lid Prop
$28.00
Replace your old trunk lid prop with this new self-triggering version! You will love needing only one hand to operate your trunk lid. Ever take anything out of an MG trunk? With the factory prop, you have to set your parcel on the ground while you use both hands to shut the trunk lid. Never again face this annoyance! Just lift slightly and the prop takes over, automatically collapsing. This prop also reduces the possibility of your trunk lid being ruined by someone trying to force it shut against the rigid factory prop. Looks like original equipment and installs easily to existing mounting brackets. Fits all MG Midgets with factory-equipped telescoping prop rods; approximately 1971-'80.

100_0764 64-65 Austin Healey BJ8 Wiring Harness
$395.00
A new wiring harness for a 1964 or 1965 Austin-Healey 300 Mk 3 BJ8. Made with PVC wiring and a braided coating, this is a wonderful concours spec harness for your project! If you have any questions, feel free to email Sheldon!

100_0011 TR4A Tunnel Cover
$38.00
A brand new gearbox cover for a TR4A. This item is made of fibreboard and is lightweight, but quite sturdy and original! If you have any questions, feel free to email Sheldon!

s-l1600 Early MGB Battery Bin
$39.95
These Battery Bins are custom molded to fit Chrome-Bumper MGB's prior to 1974 1/2 (the rubber bumper models are 1974 1/2-'80). - No modifications to your MGB are required. Battery bin slips right into place and is covered by the metal lid. - Protect your MGB from battery acid! - Keep your battery clean and dry! - Will support your battery if the battery frame is rusted out! - Made of high quality, acid proof polyethylene and will last for many years! The Early Battery Bin may be used with original 6-volt batteries or a small 12-volt battery. Please Note: Most 12-volt, group 26 size batteries that do not have protruding hold- down flanges molded onto the side will also fit. Fast, Simple, & Safety First Early Battery Bin Installation Instructions are included. These Battery Bins deserve a good home in your Vintage/Classic/Antique Chrome Bumper MGB and not kept on our Show Room Shelves. If you are local to the Rye NH area, you may avoid a shipping fee and pick one up for yourself at Brit Bits!! Thank you for inquiring. If you have any further questions and/or concerns please send an email/message to Sheldon! Please Note: Pending on location/zip code, shipping and handling fees will vary accordingly. If interested, send us your address so that we may calculate the best shipping fare for you. Thank you and we look forward to your business. Take care.

Late MGB Battery Bin
$49.95
These Battery Bins are custom molded to fit Rubber-Bumper MGB's ('74 1/2-'80). - No modifications to your MGB are required. Battery bin slips right into place and is covered by the metal lid. - Protect your MGB from battery acid! - Keep your battery clean and dry! - Will support your battery if the battery frame is rusted out! - Fits battery sizes: 21, 22, 26, 45, 58, 62, 70. (Will not fit size 24). Battery Bin, 12 Volt These Battery Bins deserve a good home in your Vintage/Classic/Antique Rubber Bumper MGB and not kept on our Show Room Shelves. If you are local to the Rye NH area, you may avoid a shipping fee and pick one up for yourself at Brit Bits!! Thank you for inquiring. If you have any further questions and/or concerns please send an email/message us! Please Note: Pending on location/zip code, shipping and handling fees will vary accordingly. If interested, send us your address so that we may calculate the best shipping fare for you. Thank you and we look forward to your business. Take care.


Shopsite
Brit Bits Home Share