GIFT CERTIFICATE
Give the gift of a Brit Bits gift certificate to your favorite British car enthusiast! As a distributor for Moss Motors we discount their retail prices and gift certificates may also be used for service / restoration work here at the shop. Please use the drop down menu to pick the amount of your gift. (You will be charged the amount you choose on the dropdown menu)
During 'checkout' don't forget to type in who the gift is for in the 'ordering instructions' section. Gift certificates ship free! If you have any questions please feel free to contact us:ben@britbits.com
Share
|
MGB Dash Top Repair Panel / Overlay / Cover, NEW
$47.45
Our Dash Top Cover will make your dash top look great. Covers your cracked dash top. We have installed many of these here at the shop over the years and are always pleased with the result! Includes adhesive and installation instructions. We offer three versions of this product: one for the 68-71 MGB, one for the 72-76 MGB and one for the 77-80 MGB. Please don't forget to specify the year of your car in the drop down menu. These covers take about a week to arrive here before being shipped to you.
Made in the USA.
These ship via UPS Ground at cost only with no outrageous handling fee. Your cover ships safely in a reinforced box to prevent bending / possible damage.
|
MGB Rebuilt Kingpin Sets
$510.00
Rebuilt kingpins sets are the safest and fastest way to replace your old worn out kingpins. All internal parts have been replaced. The kingpin bushings have been properly reamed and correctly preloaded. Included are two kingpins, a set of V8 inner a-arm bushings, upper trunnion pins with shock bushings and the lower trunnion pins with washers and seals. A built in $75.00 core charge is refunded to you upon our receiving your old rebuildable kingpins.
Other suspension parts such as a-arms, bump stops, bump stop spacers, sway bar links, shocks and competition components are available at competitive prices.
[Order]
[Checkout]
|
Gear Reduction Starters for Austin Healey, MGB, Jaguar, Triumph, Lotus
$294.95 $225.00 On Sale!
These starters are smaller, lighter and produce more torque than the original starter. They come with a one year warranty. They are excellent units, replated like new, CNC machined using a standard 1.2 hp. Nippondenso USA factory rebuilt starter. Easy to install and have a long life. We ship these to you at cost via UPS Ground. PLEASE USE THE DROP DOWN MENU TO CHOOSE THE MAKE AND MODEL OF YOUR ENGLISH CAR. Thanks you!If you have any questions please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
MGB & Midget Rostyle Wheels 13" - 14" Reconditioned
$110.00
Our reconditioned wheels are sand blasted, checked for trueness, cleaned, filed and hammered, repainted silver (allowed to cure) and masked off by hand to prepare them for precision black painted inserts as original (or better!) They are available in the 13" diameter for MG Midgets and the 14" diameter for the MGB. As these wheels are one of our most popular items- please call or email ben@britbits.com for availability and/or to get on our waiting list. The cost is $110.00 each or $100.00 each if you provide the wheel. Your carefully packed wheel ships via UPS Ground at a shipping charge of $24.00 per wheel. We pay $10.00 each for good quality usable core Rostyle wheels.
[Order]
[Checkout]
|
MGB Center Console / Armrest Repair Kit, 4 PC, '72-'80
$18.95
4 piece KIT INCLUDES:
1 Centering Guide ....A must for all '72 - '80 MGB's!
Keeps your console latch aligned, so your armrest won't crash down onto your console, breaking both latch and console. Also absorbs the force of those passengers who push sideways on your armrest with all their might to lift themselves out of your car...a common cause of console breakage! Made of black high-impact plastic, textured to match your console. Installs easily using existing armrest screw holes. No MGB should be without this guide!
1 Latch Plate ....If your console is like most, breakage or cracking has occurred around the latch area. Finally, here's a repair piece!
Fits in the latch recess of your console, and looks like original equipment. Made of black high-impact plastic, textured to match your console. Installs in seconds...can be simply set in place, or glued down permanently. Make your console like new again!
1 Contact Male Latch
1 Contact Female Striker
1 set of Installation instructions
[Order]
[Checkout]
|
MGB Heater Assembly KIT, USED, FUNCTIONING
$250.00
This USED MGB Heater assembly kit fits the MGB RD/GT from car # 303704 to 410000. (Most late MGBs, but check your car # to be sure)
The inner radiator has been pressure tested and no leaks were discovered. The fan motor was also tested and works just fine as well. Includes a new large rubber heater box bottom seal (# 363-135, Rear round heater seal (# 363-215) and the heater bottom gasket (# 363-210) If you are interested in the brand new assembly that we sell (Moss Motors # 363-005) just email me: ben@britbits.com and I'll send along the current price (5% off Moss retail)
[Order]
[Checkout]
|
Custom Cup Holder for MGB, '72-'80, NEW!
$29.95
NOW IN STOCK:
Enhance your '72-'80 MGB with this truly custom Cup Holder!
This is NOT your usual generic cup holder! This is custom molded to fit the trapezoidal-shaped area just in front of the shifter, and looks like original equipment. Made from black, textured ABS just like the console it sits on, it fits two beverages--from small cups and cans to medium sized bottles and mugs.
No fasteners are necessary. Simply set in place, and it is trapped in position. Removal is just as simple. Several of us here at Brit Bits have these in our own MGBs and have been quite happy! This item ships at cost only via USPS Priority Mail. The cost that is passed onto us by USPS (usually between $5.00 and $8.00 for most US locations) will be added to your credit card total when we pack up and weigh your order. If you have any questions please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
MGB Cruise Control Kit
$237.50
Now you can add the modern comfort of cruise control to your MGB! Engineered especially for use with HIF, HF and Zenith carbs, this kit has everything you need for a simple and satisfying upgrade. Includes 13 page color instruction manual. We order these kits as we need them and they usually take about a week to arrive here at the shop at which point we ship to you or you're more than welcome to pickup your order here in the showroom.
[Order]
[Checkout]
|
Comfy Cruise Blanket
$33.25
The Comfy Cruise 12 Volt Heated Travel Blanket is the ideal travel companion for all weather conditions. Offering both comfort and warmth, its 42" x 58" size is large enough for two people and is perfect for warming one bench seat or two bucket seats at a time. Features an 8 foot long fused cord and automatic temperature control. Made of 100% high quality polyester fleece. Great for cold winter morning starts or long hauls, the Comfy Cruise will provide warmth, whether it's plugged in or not. Comfy Cruise can also offer comfort to passengers when the air conditioning is in use! This items takes about a week to arrive here before being shipped at cost via UPS Ground.
Share
[Order]
[Checkout]
|
MGB Five-Link Rear Suspension Upgrade by Frontline-Costello
$4,450.00 $4,227.00 On Sale!
The ultimate rear suspension set-up for the MGB! Replace the forty-year-old leaf spring and lever arm damper set up with modern parallel trailing arms and coil-over gas shock absorbers. The added panhard rod is the "fifth point" that gives unrivalled rear end control and ride comfort. This conversion will transform the handling and ride of your MGB, allowing much higher cornering speeds and a safer more comfortable driving experience. Installation instructions are included.
[Order]
[Checkout]
|
MGB Front Tube Shock Kit by Frontline-Costello
$2,250.00 $2,137.00 On Sale!
Designed in conjunction with Ken Costello, the Frontline telescopic front suspension conversion is a complete bolt on upgrade for the MGB. Through many hours of testing on the road and track, their conversion has been developed to increase efficiency, grip and feel at the front end without adding any harshness. Add to this the specially developed gas dampers and ride quality is greatly improved. The conversion can be used with standard, lowered or uprated springs and anti-roll bars.
[Order]
[Checkout]
|
Wire Wheel Knockoff Hammer, 6 LB Lead
$39.95
One of my new favorite items are these 6 pound lead knockoff hammers. Made by Cook Hammer Company. These make a great gift for the British car enthusiast with wire wheels & knockoffs. We had been using four lb hammers for years here in our British car restoration shop, but recently switched to these six pounders and couldn't be happier! Experience the difference two extra pounds can make! Lasts longer, hits harder and won't damage chrome.
COOK's antimonial lead alloy provides the softest blow- protecting your chrome knockoffs while getting the job done with ease! Perfect for the Knock offs on the MGB, MGA, MG TD, TF, TC, Jaguar, Triumph TR2, TR3, TR4, TR6, Austin Healey 100 & 3000 models. IN STOCK. Item ships via UPS Ground at only the cost determined and passed down to us by UPS.
[Order]
[Checkout]
|
MGB Braided Stainless Steel/Teflon Brake Hose Set
$94.95
These competition-inspired brake hose sets meet all DOT safety standards and are street legal in all 50 states. Each set includes all brake hoses used on your car, with any required retaining nuts and/or copper sealing washers. Please allow 7-10 days transit time. Item ships at cost with no outrageous handling fees.
[Order]
[Checkout]
|
MGB Electrical Systems MANUAL / BOOK
$52.20
This is the book MGB owners have been waiting for! Based on information from his definitive website, Rick Astley has produced a book which covers everything from understandable theory to recommendations for upgrades and replacement of troublesome electrical components. The 185 page book is filled with color photos of comonents and simplified diagrams of electrical circuits. Both early and late model MGBs are covered, as well as differences between UK and export models. We rate this book as a "must have". Please allow 7-10 days transit time. Item ships at cost with no outrageous handling fee.
[Order]
[Checkout]
|
GB Stickers
$3.25
Great Britain Stickers "GB" Small oval stickers on a square backing - 3" high X 4.5" wide. I have them in white and yellow. I ran around and stuck them on everything including my show truck. So far they are holding up great in exterior applications. I picked these up from Gary Booker at GB Spares. Plenty in stock.If you have any questions please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
MGB Air Conditioning Kit (fits '62-'76)
$1,795.95 $1,699.95 On Sale!
Keeping cool in hot summer driving conditions makes the trip more enjoyable!
The Moss R&D team has designed a custom air conditioning system exclusively for your 1962-76 MGB.
Open air motoring on a hot day will be much more enjoyable and less draining with cool air flowing through the cabin instead of road heat wearing you down. The Moss Motors air conditioning system will make your driving experience more comfortable whether your top is up or down without sacrificing drivability or interior space.
Under the hood the Moss Motors air conditioning system looks factory installed, and is completely reversible. Modern system components are efficient and include an R134a rotary compressor with electric clutch, aluminum condenser with an integrated thermostatically controlled fan. Details like CNC brackets, pre-built wiring harnesses and mandrel bent steel lines ensure a perfect fit. The system can be installed on MGBs with or without smog pumps, by a professional mechanic in 8-10 hours or do it yourself over a weekend in about 16-20 hours. Cars with generators must be converted to use an alternator to use this kit.
Inside, the Moss Motors air conditioning system maximizes interior legroom with a custom evaporator box and features 4 under dash vents and a 3 speed blower motor. All wiring, hardware and brackets required are included, as well as complete illustrated installation instructions. We also sell a version of this system specifically designed for cars with superchargers- if you require the superhcharger AC system- feel free to call us for the current price. This items takes 5-7 days to arrive here at the Brit Bits shop in Rye, NH before being shipped out or ready for pickup.
[Order]
[Checkout]
|
MGB Castor Correction Kit
$259.95 $246.95 On Sale!
Here's a nice new upgrade for your MGB! These castor correction wedges slip between the front subframe and the body to reduce the built in castor angle to one more suitable for modern tires. The reduction in steering effort is dramatic, making this upgrage an absolute must for any MGB running radial tires.
This item (part# 264-855) takes about 5-7 days to arrive here at the store in Rye, NH before being shipped out to you or ready for pickup.
[Order]
[Checkout]
|
Coin Dish, MGB
$7.80 $7.00 On Sale!
1972 - 1980 MGB This molded plastic tray replaces the ashtray insert. Very convenient for coins and small items.
Share
|
Collapsible Cup Holder
$10.40
This Cup holder truly fits the decor of a sports car's interior.
Made of black, grained plastic to match other parts of the interior, it adjusts to hold any size can, cup or mug. And when not in use, it folds up to 3/4" thin!
Mounts with screws through carpet, so that it does not leave marks if removed for shows. Quit spilling on your car seats and on your pants! A tremendously nice modern convenience for your vintage car. Inexpensive!
Ships via USPS Priority Mail at cost with no outrageous handling fee.
Share
|
Cowl Vent Cover
$9.45
Stay warmer and drier with this magnetic vent cover!
Cover will stop water leaking into your MGB, and eliminate that cold draft when driving in chilly weather. Also prevents debris from falling into your vent.
Magnetic cover stays put while driving, and will fit in your glove box when not in use. If you require us to ship- the additional cost of USPS Priorty Mail shipping is added onto your total when we process your payment. Item ships at cost only with no outrageous handling fee.
Share
|
Header Manifold Wrap Blanket- Set of two
$79.95
The Header Manifold Blanket provides excellent heat-retention for exhaust headers and manifolds. The flexible heat shield simply clips into place on the upper portion of the header. Set of 2 measuring 20" x 24" each. This is Moss Motors #337-445. Please allow 7-10 days transit time. If you require us to ship- the additional cost of USPS Priorty Mail shipping is added onto your total when we process your payment. Item ships at cost with no outrageous handling fee. If you have any questions please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
License Plate
$10.40
Display your loyalty with one of our regulation size license plates. Embossed aluminum plates with crisp screen printing. The price is $10.40 for the Union Jack, MG Crest and TR Shield plates. The price is $14.20 for the TR6, TR7 and Spitfire plates. Items ship at cost via USPS Priority Mail with no outrageous handling fee.
|
Battery Disconnect Switch
$13.25
Just the thing for a quick disconnect for your battery - installs in just a few minutes. Connects to the negative terminal of the battery and will prevent battery drain during the layup months or just an added feature to help prevent car theft.
Share
|
MGB: Bezel for Radio Speaker Screen, Chrome, '62-'67
$35.00
This is one very good used original chrome Radio Speaker Screen Bezel for the early MGB and GT Models. Chrome is in excellent shape. All four studs are intact, straight and include all four nuts. This fits over the speaker screen on the radio console. This bezel is # 6 in the drawing below. For your reference- the reproduction of this bezel retails new for just over seventy dollars so here is a great chance to save a few dollar on a great used original piece of trim!
Fits early MGB and GT model years; '62-'67 including '62, '63, '64, '65, '66, '67 RD to 138400, GT to 139470
Item ships at cost with no outrageous handling fee.
[Order]
[Checkout]
|
MGB Center Console, Tunnel, Fits 1972-1980 MGB
$119.65
This Center console is a reproduction of the original factory consoles found in the '72-'80 MGB model. Number four in the drawing. Item ships at cost only with no outrageous handling fee. Please allow 7-10 days for delivery.
[Order]
[Checkout]
|
MGB Premium Leather Armrest
$56.95
Replace your worn out armrest with this premium quality piece for just a few dollars more than the vinyl replacement.
Leather. Won't tear at seams. Won't crack in cold weather. Even smells nice!
Correct beading. Other armrests use fat beading.
Superior needlework and upholstering. Corners are crisp, edges are sharp. No rollover.
Grained black fiberboard underpanel. Other armrests use plain black cardboard.
Tacked, not stapled. Just like factory armrests. Item ships at cost only with no outrageous handliong fee. please allow 7-10 days for delivery.
[Order]
[Checkout]
|
MGB Auxiliary Center Console and Armrest, Fits 1962-'71 MGB
$104.95
Similar to vintage after market consoles made by Amco some years ago. This fits the 1962-1971 MGB. Black grained ABS thermoplastic base with leather covered armrest. A large storage compartment is located under the armrest pad and a cup holder is located in the forward portion. Please allow 7-10 days transit time. Item ships at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
MGB Center Console LINER, Rubber, NEW!
$11.95
A soft rubber pad that protects the recessed screw holes from getting full of the Chapstick you left in 105 degree heat, and it's removable to easily clean that same Chapstick off!
Add a touch of luxury to your MGB with this practical Rubber Console Mat! Many higher-end cars now come with mats such at this, and for good reason.
Installing this Mat stops the annoying rattling of items against your console floor, and prevents them from sliding around and scratching as well.
The Soft Touch Mat FEELS great--makes picking up coins, etc. from its ribbed surface a pleasure. And it LOOKS terrific, too! Made in USA of high quality industrial rubber. Black.
Note: These DO fit the aftermarket consoles for pre-1972 MGBs, by trimming the rear edge! Item ships at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
Ball Joint Puller / Tie Rod Removal Tool
$45.00
Tie Rod Removal Tool or Ball Joint Separator by the Draper Tool Company. Made in the UK. I have used various methods over the years to remove tie rods with mixed results. This is the only tool I have ever used for this purpose that works easily and doesn't damage the rubber boot. And most of the time I just want to change the boot anyway. Ever since I discovered this tool I have tried to keep a few in my display case at all times. It's a good seller, it works and you'll love it! Item ships at cost.
Share
[Order]
[Checkout]
|
MGB Air Vent Set & Escutcheon, 'Face Level'
$45.95
This is a very good used Air Vent Assembly for the MGB and MGB GT Models. This set includes both left and right hand side center 'Face Level' Vents and the the Escutcheon that trims the two vents. All four foams remain intact and open and close freely. A nice item indeed! This vent assy is in stock and ships at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
MGB Shop Manual, "Bentley" Reprint for the '62-'74 MGB
$47.45
Comprising the official Driver's handbook, workshop manual and special tuning manual. If you own an early MGB ('62-'74) this is THE manual to have on your workbench. It's the one that our MGB technicians use here at Brit Bits and we recomend you get yourself a copy. Everything from basic tuning data, to torque settings and complete component rebuilding are covered by this comprehensive manual. Please allow 7-10 days transit time. This book ships via USPS Priority Mail at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
MGB Shop Manual, "Bentley" Reprint for the '75-'80 MGB
$40.50
Comprising the official Driver's handbook and workshop manual. If you own a late MGB ('75-'80) this is THE manual to have on your workbench. It's the one that our MGB technicians use here at Brit Bits and we recomend you get yourself a copy. Everything from basic tuning data, to torque settings and complete component rebuilding are covered by this comprehensive manual. Please allow 7-10 days transit time. This book ships via USPS Priority Mail at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
MGB, The Complete Story
$23.75
by Brian Laban. Another superb history of the MGB, starting at the Morris connection and moving through the demise of the MGB. High quality, and invaluable as a reference, it includes lineage, development, modifications and competition history. Softbound, 7-5/8" x 10-1/4", 208 pages. This book ships at cost only with no outrageous handling fee. Please allow 7-10 days transit time. cheers!
[Order]
[Checkout]
|
MGB Seat Adjusting Handle, USED (sold individually)
$9.95
Have you ever had one of these snap off while trying to adjust a rusted seat assembly? I have. After you finish cursing your broken handle and maladjusted seat-- spray some penatrating oil in the works and buy one of these good used handles to replace the one you broke. I have a small supply of chrome handles in good shape with only minor pits visible from several inches.
Fits: 1969 on: RD from (c) 158371 on & MGB GT from (c) 158231 on
For your reference only- We also sell the new replacement handles for $31.30 so here is a great chance to save a few dollars on a good used part! If you're interested in buying a new handle call or email ben@britbits.com. Item ships at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
Shop Apron, MG or Triumph
$18.75
MG or Triumph Logo shop apron with adjustable straps and three deep pockets. The same aprons worn by our technitions when working on cars or baking cakes! Please allow 7-10 days for delivery. Item ships at cost with no outrageous handing fee.
|
Points/Condenser Set, Made by Lucas
$11.50
The 152-220 Point Set fits all cars with the Lucas 25D Distributor - MG - Triumph - Austin Healey. Although the aftermarket version is pictured in the photo the 152-220 sold here is actually Made by Lucas.
[Order]
[Checkout]
|
Bonnet/Hood Self Triggering Prop (MGB '71-on)
$27.50
The self-triggering /Automatic telescopic prop is much easier to use than the factory type that requires use of both hands to release. Simply lifting the hood slightly releases the catch. Cat not included. Item ships at cost only with no outrageous handling fee. Please allow 7-10 days transit time.
Share
|
Boot / Trunk Self Triggering Prop Rod
$28.45
The self triggering /automatic telescopic prop rod is much easier to use than the factory type that reqires the use of both hands to release. Simply lifting the trunk slightly releases the catch to lower. Item ships at cost only with no outrageous handling fee. Please allow 7-10 days transit time.
Share
|
Vintage Competition Seatbelt
$79.95
Quick release buckle, keeps you firmly, yet comfortably, in your seat. I have a set in my Sunbeam and love 'em! Mounting hardware included. These are sold individually. These belts are suitable for installation in virtually any British Sports car. Save for a small change in dimensions, the design of the quick release buckle has remain unchanged since the 1950’s. The manufacturer of the buckles went from a 3 inch wide design to the current 2.5 inch wide design in 1999.
The mounting eye-bolts are 7/16” UNF. Each belt is a maximum of 29 inches long, measured from the center of the snap hook to the engaged part of the buckle. Item ship at cost only with no outrageous handling fee. Please allow 7-10 days transit time. If you have any questions about this or other seat belt options or if you would like a shipping quote- please feel free to email ben@britbits.com
[Order]
[Checkout]
|
Rubber Gloves
$9.95
I tried more than a dozen different kinds of gloves before I found these. I use them all the time, I'm in and out of the shop all day long, I can be under the hood one minute and the next on the phone and looking online or through manuals. Thin enough to do small tasks with confidence, great for painting and can sometimes be reused. These are powdered with only a small amount of oat starch which allows them to come on and off with ease. Two things I've found that these gloves don't do well- one is in a cleaning tank with degreaser and the second is with jobs pertaining to bearings(wheel bearings, main and rod bearings) where you really need the ability to feel small tolerances or roughness. 100 large, latex, ambidextrous gloves per box. IN STOCK. These ship at cost only with no outrageous handling fee.
[Order]
[Checkout]
|
MGB Supercharger Systems
$3,287.00
The new MGB supercharger system uses the same Eaton positive displacement roots-type supercharger found on contemporary OE applications such as Mercedes Benz and Jaguar. We installed one in our MGB GT here at Brit Bits and love it! In spite of its modern origin, Moss was careful to design the system to look like it was a factory-installed option that complements the classic MG image.
Moss engineers designed an intake manifold that provides equal airflow, pressure and fuel mixture to each cylinder. By optimizing the distribution in the manifold for each cylinder, you can run more boost pressure without the chance of harmful detonation. The Moss supercharger system produces 7.5-8.25 PSI of boost at sea level. On our otherwise stock test car, that almost doubled the rear wheel horsepower. Bolted on to a stock engine you may expect a HP increase of 40% at the flywheel. Click Here to view Dyno Sheet details.
The Supercharger kit is very complete and includes a 4-rib serpentine belt drive system, new cast iron water pump, a set of colder NGK BPR7ES sparkplugs and a high-flow K&N air filter. The 1968-74.5 kit also includes a new Lucas high output alternator.
The 1965-67 kit fits 5 main engines with generator. For these vehicles we also offer an alternator conversion kit which includes a new high output alternator, four rib pulley, all connectors and full instructions for converting the car from positive to negative ground. The alternator has more durable bearings than the generator and will offer greater performance.
Detailed installation instructions with photos for system 150-069 are available Here, and for system 150-079 are available Here. The installation can be completed by a competent mechanic or hobbyist with hand tools in about nine hours. Our Frequently Asked Questions listing for more information is available Here. To view article detailing the installation procedure, click Here.
For a complete listing of our MGB Boost gauges click Here
Please note: These kits are designed to be installed on engines that are in good condition with the original compression ratio and correctly operating distributor and fuel system. Increased compression due to block or head modification, worn distributor components, or a weak fuel pump can contribute to damaging detonation under load.
The Big Boost Pulley Upgrade Kit should only be installed on low compression engines or those where head modifications allow a higher boost without detonation.
Prices start at $3,287.00 for the '68-'80 MGB and $3225.00 for the '65-'67 MGB. Superchargers are also available for other British car models. Call or email ben@britbits.com for the latest pricing information.
[Order]
[Checkout]
|
Shock Fluid
$13.25
Lever Arm Shock Fluid formulated for British Girling and Armstrong lever arm shock absorbers. 16 fl. oz container. Fully compatible with the original shock fluid. While normally here in our shop we use it to top off the oil levels. Moss recommends for best results, to plan on replacing your old fluid completely. Custom blended for Moss Motors, LTD.
|
Speedometer and Tachometer Guages
$140.00
We have a small selection of used gauges in stock - they have been cleaned and re-calibrated to spec. We do speedometers and mechanical tachometers for cleaning and calibration in house.We can do your original with a short turn around time. Very often the biggest problem these gauges have is that the original grease has caked up and hardened causing failure. We also offer full rebuilding of all gauges. For price and availability per gauge please contact ben@britbits.com
[Order]
[Checkout]
|
MG Valve Stem Caps
$5.20
Caps feature raised octagon image and come in 2 colors- silver or gold.
|
Glovebox Owners Manuals
Reprints of the factory glovebox manual that came with your car when it was brand new. Gives all kinds of information that is hard to find anywhere else, especially important on lowering and raising the convertible top to minimize wear and tear. Please feel free to email me at ben@britbits.com for current pricing as the prices vary from model to model.
Share
[Order]
[Checkout]
|
Workshop Manual Glovebox Size
These shop manuals are awesome and they fit in the glovebox - just came out this year! While someone my age needs a magnifying glass for the fine print, these manuals have just about every bit of technical information the full size shop manuals have, including wiring diagrams.
Though not as complete as the full factory manuals, these clever new manuals are packed with enough information to keep your car on the road. Tune up data, repair and rebuilding information, dimensions and torque specs are all here in these compact 5 1/2"" x 8 1/2"" books.
As prices vary by model- call or email Ben for the latest price information: .ben@britbits.com
[Order]
[Checkout]
|
MGB Fender, OE, Rear Left (driver side) '74.5-'80
$699.00
MGB Fender, OE, Rear Left (driver side) for all Rubber Bumper MGB.
This left rear wing fits years 1974.5, '75, '76, '77, '78, '79 & '80
This is part #HZA5001. For your reference Moss Motors sells a reproduction of this fender for $899.95.
This fender is in new condition with no shipping damage. A nice find indeed!
I prefer local pickup, but if you are unable to pickup here at Brit Bits, Inc. here in Rye, NH USA (one hour north of Boston) We will also ship this item via truck freight collect.
[Order]
[Checkout]
|
MGB Tonneau Cover, NEW! w/ hardware
$317.95
Brand new Tonneau Cover and hardware for the '70-'80 MGB. This high quality Robins tonneau includes the pockets for both headrests. It was recently purchased from Moss Motors (part# 241-465) but not needed and never installed. It remains in the box. If you've ever tried fitting a used tonneau to your B you may already know how difficult, if not impossible a task that can be. With this BRAND NEW tonneau you will be able to install the included hardware in just the right spot for YOUR MGB.
Manufactured by Robbins (known for their quality craftsmanship and attention to detail that true enthusiasts insist upon), this tonneau cover is tailored US imported left-hand drive cars only. Supplied complete with all necessary snaps for on the tonneau.
FITS MGB '70-'80 from (c)187211 on (including 1970, '71, '72, '73, '74, '75, '76, '77, '78, '79, '80)
This item takes 5-7 days to arrive here and ships to you at COST only and as always sales tax free. If you have any questions about this or any of our British tops and tonneaus, please feel free to contact us:ben@britbits.com
[Order]
[Checkout]
|
Turn Signal Switch, MGB 62-67 & Sprite MkIII / Midget Mk II
$71.25
Turn Signal Switch Assembly: Original style for the following MGB and Spridget Models:
MGB: '62-'67 (includes '62, '63, '64, '65, '66 & '67)
MG Midget MkII
Austin Healey SPRITE Mk III
This is part # 141-770 is IN STOCK and ships only at the cost passed down to us from the shipping company. As always sales tax free.
[Order]
[Checkout]
|
SWITCH, turn signal, headlight dimmer for MGB
$99.70
Turn Signal / Headlight Dimmer Switch Assembly: Original style for the following MGB Models:
RD (roadster) from (c)219001 to (c)267109. Also fit MGB GT from (c)219001 to GT(c)267332. This item is part # 141-820 and is IN STOCK and ships only at the cost passed down to us from the shipping company. As always sales tax free.
[Order]
[Checkout]
|
MGB Map Pocket and Finisher, Original
$59.95
This original MGB Map Pocket includes the chrome finisher on top. The original carpet remains intact and somewhat thinned consistant with its age. the carpet has been carefully touched up with fabric paint so as not to overspray the vinyl and chrome. A nice piece with many more seasons remaining!
[Order]
[Checkout]
|
MGB Rear Differential Cover (Reconditioned) & Gasket
$69.95
This Rear Differential Cover for the Tubed Type Axle on an MGB has been reconditioned by our in-house pros. The outer portion of this cover has been sandblasted, primed and painted black. The contact surface is flat and has been cleaned on the wire wheel. This cover includes a new Rear Diff Gasket.
**Again- this Cover is for the Differential on an MGB TUBED Type Axle. If you're not sure if your MGB has a tubed type axle, click the listing title for more info. If you have any questions, please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
Radiator Expansion / Overflow Tank and New Filler Cap OEM
$89.95
OEM Radiator Expansion / Overflow Tank and New Filler Cap for MGB, Sprite & Midget. Original and Reconditioned by professionals. This original OE / OEM brass tank was carefully cleaned on a wire wheel prior to being primed and painted black. If you have any questions, please feel free to contact us:ben@britbits.com
Share
[Order]
[Checkout]
|
MGB Accelerator / Choke Control Bracket, N/A
$54.95
This good used Accelerator Control Bracket fits MGB Models with HIF-4 Carb setups. This is the stock / OEM Bracket for the '72, '73 & '74 MGB Roadster. This is Bracket is no longer available new, but this bracket is in excellent condition and has not been modified as many others have been over the years.
[Order]
[Checkout]
|
MGB Header Rail (Original used)
$99.95
I have several good used Original MGB Header Rails. These OE rails are not rusty and the screw holes are in good shape (not stripped). Feel free to contact us at ben@britbits.com if you need additional parts for your header rail(latches, pads, header rail retainer, seal, top, frame, etc)as they do not come with the rail. We also sell NEW replacement MGB Header Rails (part# 406-250) for $227.95.
[Order]
[Checkout]
|
Set of 4 full-pint traditional beer glasses, with "MG Safety Fast!")
$19.95
What better way to enjoy a post restoration beer than with an MG Pint Glass? This set of four "MG Safety Fast" glasses is one of our most popular gifts.
(We also offer pint glass sets for Triumph and Austin-Healey afficianados which you can order by calling or emailing ben@britbits.com)
[Order]
[Checkout]
|
MGB Glove Box Lid & Chrome Finisher Strip, '62-'67 MGB
$99.95
This used original lid includes the chrome finisher strip. For a show quality finish, this OE lid would be a good candidate for a new coat of black wrinkle-finish MGB dashboard paint (available here for $12.99/can)
Neither the lid nor finisher strip are available new. If you need the glovebox lock and key, lid restraint and screw or any other items, feel free to email ben@britbits.com
[Order]
[Checkout]
|
